Detection problem AMIBIOS

1X

DRAM Refresh Failure. Have trouble accessing the system memory to refresh it.
2X
Network failure parity.Pada computer transmitted data, baisanya added parity bits to detect and correct this is done by the network error.Pekerjaan done by komputer.Hal parity this may be caused by memory or mainboard.
3X
Failure memory base 64 K.Base 64 K memory is the first memory available on this RAM.Kegagalan can disebakan the memory slots are grouped in modules have rusak.Hal chip is connected with the damage mobo.
4X
Timer.Kemungkinan system failure error on one or more of the system timer is used to control the functions on the mobo.
5X
Failure prosesor.Disebakan processor overheating or not attached to the slot / socket it correctly.
6X
Failure keyboard controller / gate A20, which is the chip on the mobo that regulate the function of the keyboard.
7X
Fault on the processor.
8X
Failure to read / write memory displays.
9x
Damage to BIOS
10X
Error in CMOS
11X
Damage to the cache memory.


handling:
1. for the case of 1.2 or 3 times beep, try to correct the position of first memory persists dahulu.Jika possible faulty memory. Replaced with a new memory.
2. for 4,5,6,7 or 10 times the 'beep', damaged motherboards. Should be repaired or replaced with new ones.
3. to 8 times 'beep', you try to replace the VGA card.